MotionCam S (PhOD) Jeweller

Jeweller communication technology

Proprietary wireless communication technology to transmit alarms and events.

Key features:

• Two-way communication.
• Advanced anti-sabotage.
• Block encryption featuring a dynamic key.
• Instant notifications.
• Remote configuration via the Ajax apps.

Frequency bands

868.0–868.6 MHz

Maximum effective radiated power (ERP)

up to 20 mW

Automatic power control to reduce power consumption and noise interference.

Radio signal modulation

GFSK

Radio signal range

up to 5,600 ft

Between detector and control panel (or range extender) in an open space.

Encrypted communication

All the data stored and transmitted are protected by block encryption with a dynamic key.

Frequency hopping

Radio communication uses frequency hopping to prevent interception and jamming.

Wings communication technology

Proprietary wireless communication technology to transmit photo verifications.

Key features:

• Two-way communication.
• Block encryption featuring a dynamic key.
• Advanced anti-sabotage.
• Data package reloading in case of transmission errors.
• Photo delivery check.

Frequency bands

868.0–868.6 MHz

Radio signal range

up to 5,600 ft

Between detector and hub or range extender in an open space.

Encrypted communication

All the data stored and transmitted are protected by block encryption with a dynamic key.

Frequency hopping

Radio communication uses frequency hopping to prevent interception and jamming.

Photo by Alarm

A built-in camera is activated if the detector is armed and motion is detected.

Photo on Demand

The user takes pictures at any time or when the detector is armed (depending on settings). The feature is disabled by default.

Photo by Scenario

The detector’s camera takes pictures automatically when other Ajax detectors are triggered. The feature is disabled by default.

Photo by Schedule

The detector automatically takes photos at a specified time. This feature is available for hubs with firmware version OS Malevich 2.19 or higher.

Adjustable photo resolution

640 × 480 px
320 × 240 px (by default)
160 × 120 px

Adjusted by PRO or user with admin rights in the Ajax app.

IR backlight

For night photography and low light conditions.

Series of pictures

from 1 to 5 images with a resolution of 320 × 240 px or 160 × 120 px
from 1 to 3 images with a resolution of 640 × 480 px

Adjusted by PRO or user with admin rights in the Ajax app.

Photo delivery time

up to 7 s — 160 × 120 px resolution
up to 9 s — 320 × 240 px resolution
up to 20 s — 640 × 480 px resolution

Photo delivery time depends on the image resolution selected in the device settings.

Batteries

2 × CR123A

Pre-installed.

Type

Type C.

Calculated battery life

up to 4 years

With Photo on demand toggle disabled.

up to 3 years

With Photo on demand toggle enabled.

Detector’s operating voltage range

4.2−6.2 V⎓

Detector’s nominal operating voltage

6 V⎓

Quiescent detector’s current consumption at nominal voltage

0.058 mA

Maximum detector’s current consumption at nominal voltage

18 mA

Full capacity

3,300 mAh

Low battery voltage

4.55 V⎓

Low battery recovery voltage

4.9 V⎓

End-of-life battery voltage

4.2 V⎓

Device is switched off.

End-of-life battery capacity

600 mAh

Manufacturer

Panasonic

MotionCam S (PhOD) Jeweller

SmartBracket mounting panel with holding screw

2 × CR123A battery (pre-installed)

Installation kit

Quick start guide