United States
uartBridge — is the module for integration with third-party wireless security and smart home systems.
A wireless network of smart and secure Ajax detectors can be added to a third-party security or smart home system through the UART interface. The module has a WH-4 connector (4-pin plug) on the board and requires a matching HU-4 connector (4-pin socket) for the wire-to-board connection.
Connection to Ajax hubs is not supported.
Supported devices:
- MotionProtect Jeweller
- MotionProtect Plus Jeweller
- DoorProtect Jeweller
- Ajax SpaceControl Jeweller
- GlassProtect Jeweller
- CombiProtect Jeweller
- FireProtect Jeweller
- FireProtect Plus Jeweller
- LeaksProtect Jeweller
Integration with third-party detectors is implemented at the protocol level.
Technical specifications
Communication interface with central unit | UART (speed 57,600 Bd) |
Use | Indoor |
Radio signal power | 25 mW |
Radio communication protocol with Ajax devices and detectors | Jeweller |
Radio frequency band | 866.0 – 866.5 MHz 868.0 – 868.6 MHz 868.7 – 869.2 MHz 905.0 – 926.5 MHz 915.85 – 926.5 MHz 921.0 – 922.0 MHz Depends on the region of sale. |
Maximum distance between a wireless detector and the uartBridge integration module | Up to 2,000 m (in open space) |
Maximum number of connected devices | 85 |
Detection of jamming | Yes |
Detector performance monitoring | Yes |
Power supply voltage | 5 V⎓ (from the UART interface) |
Operating temperature range | From –10°С to +40°С |
Operating humidity | Up to 90% |
Dimensions | 64 × 55 × 13 mm (without antennas) 110 × 58 × 13 mm (with antennas) |
Service life | 10 years |
