Available in
App Store
Hub Hybrid
Hybrid security system control panel
The synergy of wired and wireless technologies
Hub Hybrid is a game-changer among professional security systems. It is the first Ajax control panel supporting Jeweller devices and the all-new Fibra product line. Wired and wireless technologies are combined to build complex protection regardless of facility size, steel or concrete obstructions. Security is enhanced by informative notifications, photo verification of alarms, real-time system control in the app, and automation scenarios.
Remote control and configuration
-
![]()
Wings -
![]()
Jeweller -
![]()
Fibra
Up to 3.5 days
of system operation on a backup battery
8 lines
to connect wired Fibra devices
COMING SOON
Ring connection topology
against sabotage
Alarm photo verification in 9 seconds
without privacy concerns
3 independent communication channels
out of the box
Security automation
Remote control and configuration
-
![]()
Wings -
![]()
Jeweller -
![]()
Fibra
Up to 3.5 days
of system operation on a backup battery
8 lines
to connect wired Fibra devices
COMING SOON
Ring connection topology
against sabotage
Alarm photo verification in 9 seconds
without privacy concerns
3 independent communication channels
out of the box
Security automation
This is the device of the Fibra wired product line. To purchase, install and administer such devices, you need to be an accredited partner, undergo training and gain access.
Apply for access
Hardware
Maximum without expansion modules
Communication through steel and concrete
![]()
Fibra
Fibra communication technology allows you to wire independent lines up to 2 km long. Eight lines in one system run by Hub Hybrid minimize potential damage. Even a completely broken line leaves the security system at 87% operational. And with wireless sensors, this percentage will be even higher.
With Fibra, you get the flexibility to build a star topology or use 8 lines as zones in an iconic burglar alarm. In any configuration, you get an intelligent security system.
![]()
Jeweller
Jeweller radio protocol provides two-way communication between the hub and wireless devices at a distance of up to 2,000 meters, allowing remote system control and alarm transmission in 0.15 seconds.
Jeweller applies time frames to synchronize devices communication, authentication to prevent forgery, and encryption to protect the data. An energy-efficient protocol provides wireless devices with up to 7 years of battery life.
Up to 5 range extenders with a communication range of up to 1,800 meters can be connected to Hub Hybrid by radio or cable via Ethernet*.
Always online via Ethernet and cellular networks
Hub Hybrid can be connected to three Internet providers at a time via Ethernet cable and 2G, 3G, and LTE SIM cards. Automatic switching between channels takes seconds.
Hub is available in two versions: Hub Hybrid (2G) supporting 2G cellular networks and Hub Hybrid (4G) supporting 2G, 3G, and 4G/LTE networks.
Three days on a backup battery
Hub Hybrid with a backup battery can power a system of 30 wired devices for 60 hours. Wireless devices operate on batteries and do not require additional power supply.
Fibra devices consume less than 60 µA, which is 100 times less than similar bus detectors from other manufacturers.
Anti-sabotage
The seven countermeasures
Tampers to alert of demounting and case opening
Demounting and case opening detection
The hub board features two tampers that detect opening and demounting attempts.
Authentication against forgery
Protection against device forgery
To authenticate devices, unique tokens and properties are used. The hub checks them for each communication session. If any parameter fails the check, the hub ignores the device commands. The procedure excludes the possibility of system control by a third-party device: key fob, smart button, or keypad.
Connection loss notification in a minute
Hub communication loss detection
Ajax Cloud server polls the hub at intervals of 10 seconds or more. In case of mobile frequencies jamming and disconnection of the wired internet, the server can inform a monitoring station about the complete isolation of the object in just 1 minute.
Encryption and frequency hopping to protect data
Data protection
All the data stored and transmitted are protected by block encryption with a dynamic key. Radio communication uses frequency hopping, which makes interception and jamming more difficult.
Jamming alert
in 30 seconds
in 30 seconds
Jamming detection
The hub analyzes the quality of communication with system devices. If some of the data packages are lost, the hub will change the transmission frequencies and inform the monitoring station of interference detection.
Events delivery in 0.15 seconds
Event transmission and delivery
The monitoring station is notified about alarms and system events in 0.15 seconds. Due to the addressability of devices, the message includes the time, device model, devicename, event type, and room.
Coming soon
Physical protection of the line against break
Hub Hybrid features 8 lines and supports ring connection topology — up to four rings in a hybrid security system. In the event of a line breakage, the ring splits into two working segments, devices continue to operate, and the system notifies a security company and users about the incident.
The functionality will not be available at the time the device is released. Ring topology support will become available with future OS Malevich updates.
Features
Alarm photo verification in 9 seconds
Hub Hybrid supports both MotionCam and MotionCam Outdoor wireless motion detectors. When triggered, detectors take a series of photos, helping to evaluate the situation at the facility. Visual verification helps you instantly assess the situation, saving users from concerns, and security companies — from unnecessary dispatches.
1
2
3
Automates security
Hub Hybrid allows creating up to 32 scenarios and minimizing the impact of human factor impact on security. The hub can arm and disarm a facility or part of it by schedule. Instantly activate a smoke machine if someone enters the premises. Blackout the premises and turn on emergency lighting in case of fire. Or shut off water in case of a leak. Control lights, electric locks, roller shutters, and garage doors — by arming/disarming, button press, or a detector alarm.
-
![]()
Water -
![]()
LeaksProtect -
![]()
Relay -
![]()
Electrovalve
-
![]()
Arming -
![]()
Relay -
![]()
Electric lock
-
![]()
Schedule -
![]()
WallSwitch -
![]()
Roller shutter
-
![]()
MotionProtect Outdoor -
![]()
WallSwitch -
![]()
Street lighting
Software
A complete set of business tools
App data is protected by encryption and automatic backups. With cloud synchronization, starting work on a new smartphone or computer takes a few minutes — just install the program and log into your account.
Security control via smartphone
The Ajax app allows you to control security, smart plugs, and relays. On-site and remotely.
32 languages of the app interface are available
32 languages of the app interface are available
Alarms of the highest priority
The Ajax app supports critical notifications — events with a loud siren sound ignoring the silent mode of the smartphone*.
32 languages of the app interface are available
Alarms of the highest priority
The Ajax app supports critical notifications — events with a loud siren sound ignoring the silent mode of the smartphone*.
Instant cloud sync
Ajax apps and security systems communicate through the Ajax Cloud server. The server uses a proprietary binary protocol and automatic load balancing for uninterrupted processing of millions of data packages per minute. The server is physically located in several data centres. This infrastructure provides server availability of 99,995%*.
99,995%
Server availability in 2021
Progress in the core
Hub Hybrid runs on OS Malevich — a real-time operating system developed by Ajax Systems. The system is immune to viruses, protected from cyber-attacks, and extremely reliable. The hardware configuration allows Hub Hybrid to evolve and remain relevant for years.
How does OS Malevich update
New features are ready to use
The hub is updated over the air (OTA), automatically or by engineer's command. The process starts when the system is disarmed and takes less than a minute. Each update improves the system and adds new features.
Installation
Convenience in the details
- Pre-installed communication modules х2 SIM Ethernet
- Built-in power supply
- Screw-type terminal blocks
- Rails for fixing the backup battery
- 20 fasteners for fixing cables
- 5 perforated zones for cable routing
More freedom with the Fibra technology
With Hub Hybrid, you don't have to wire extra meters of cable. The control panel features 8 independent terminals compatible with all Fibra devices regardless of the type. Security detectors, keypads, or sirens connect to the same line and ensure security of a certain zone. The physical cable connection and the distribution of devices by rooms and groups in the app are not related.
No programming
Hub Hybrid is connected and configured via a smartphone or desktop app — forget about command-line programming. The interface increases the installation speed and minimizes errors.
32 languages of the app interface are available
- Adding a device with QR scan
- Managing the system users
- Changing hub settings
- Creating automation scenarios
- Connecting to the monitoring station
32 languages of the app interface are available
32 languages of the app interface are available
Power supply stress test
Hub Hybrid features a unique testing mechanism to check the power supply of all wired devices in the system. The test is launched in the app and simulates the maximum possible power consumption: sensors give alarms, keypads are activated, sirens are turned on. If the system passes the test, you can be sure that all its devices will have enough power in any case.
100 wired detectors in 10 minutes
Line scanning
We have made the pairing process automatic. The line scanning function shows all devices connected to the hub, allowing you to quickly set names, separate security groups and virtual rooms.
Device identification
There are two ways to determine which device is in front of you: switching on the LED and by triggering. They allow pointwise bind and test the operation of devices.
Synchronization with the security monitoring station
A monitoring station engineer does not need to manually configure zones. All information about the hub devices is automatically synchronized by the PRO Desktop monitoring panel.
QR scanning
To add a device, all you have to do is scan the QR code on the body using the Ajax app. Then set a name, select a room and a security group.
Synchronization with the security monitoring station
The monitoring station engineer does not need to manually configure the zones. All information about the hub devices is automatically synchronized by the PRO Desktop monitoring panel.
Compatible devices
*
The functionality will not be available at the time the device is released. Ring topology support will become available with future OS Malevich updates.
*
The cloud server uptime in 2021