United States
FireProtect 2 RB (CO) UL Jeweller
Wireless fire detector with a CO sensor. Version with replaceable batteries
Coming soon
Against invisible threats
FireProtect 2 is a next-gen detector designed for residential fire safety. The carbon monoxide sensor alarms before the concentration level become threatening and notify about danger with a built-in powerful siren and critical alerts from Ajax apps. Thought-out design, mounting, and in-app settings make installation straightforward and quick. Everything meets the most modern fire safety standards.
FireProtect 2 features in a minute
Wireless fire detector with heat, smoke, and CO sensors
Watch on YoutubeKey features
Interconnected alarm in 20 seconds
Up to 5 years of operation
with pre-installed replaceable batteries
CO sensor
With 10 years of service life
Compliance
Remote control and configuration
85 dB built-in siren
Jeweller radio communication
Power adjustment
Informative push notifications
Critical
Ajax
Home: critical carbon monoxide (CO) level detected, FireProtect 2 in Kitchen. Leave the premisses.
Ajax
Home: carbon monoxide (CO) level has decreased, FireProtect 2 in Kitchen. You can return to the premises if necessary.
Up to 5,500 ft (1,700 m)
range of communication with an Ajax hub
Operates as part of the Ajax system or without pairing with an Ajax hub
Two colours
SmartBracket
with an adjustable rotation angle
Hassle-free installation
QR-code
SmartBracket
App
Wherever there is a risk of CO poisoning
Kitchen
Garage
Barn
Basement
Discover future-proof hardware
Test/Mute mechanical button
Protects from invisible danger
Carbon monoxide (CO) is colorless, odorless, and otherwise imperceptible without a carbon monoxide detector, so poisoning can occur unnoticed. Even low concentrations can be enough to have a negative health impact, especially on those with chronic illnesses, pregnant, the elderly, and young children. High-level exposure can cause permanent damage or even death in a very short period of time. FireProtect 2 warns about a dangerous CO concentration at the level of 70 ppm before even the first signs of poisoning occur. A built-in chemical sensor is responsive to low concentrations and can accurately detect the CO level straight up to 10 years.
CO alarm
- 70 ppm in 60–240 minutes
- 150 ppm in 10–50 minutes
- 400 ppm in 4–15 minutes
Stable performance for years
FireProtect 2 complies with strict residential fire safety standards with long-lasting battery life while featuring constant data exchange with a hub and real-time analysis system. The detector operates on two CR123A batteries with a 5-year battery life. The batteries are replaceable, so after their discharge the installer pops the new ones, and FireProtect 2 continues to operate as usual.
Low battery warning
The detector reports low batteries at least 30 days before its full discharge. Installers and users get notifications from their Ajax apps. Also, FireProtect 2 has an LED indicator and audible beeps for a low battery alert.
Push notification
Audible indication
LED indication
Up to 5 years of operation
with replaceable CR123A batteries
Always informed, everywhere
For residential fire alarm systems, informing people about fire danger is the priority. FireProtect 2 is equipped with a powerful 85 dB siren to eliminate the risk of missing an alarm. The detector uses impossible-to-ignore tones with different patterns to indicate an alarm or event, so it’s easy to recognize the type of threat and react accordingly.
Different sound and LED indications
Dangerous CO level
Malfunction
Low battery level
End of life
Wireless interconnection
All FireProtect 2 detectors can synchronously notify about the fire. As soon as one of them detects a threat, it only takes 20 seconds for the sirens of other fire detectors at the facility to activate. If the fire occurs at night, the volume of 85 dB can wake up even a deep sleeper.
Interconnected fire alarm in 20 seconds
Unleash the Ajax power
The Ajax smart and complex ecosystem brings new standards to the fire safety industry. FireProtect 2 is ready to protect your home without an Ajax hub but can do even more when connected to it. Intuitive Ajax apps provide remote setup and all detector information in real-time from anywhere the Internet is available, on a smartphone or PC. With instant notifications, there is no chance of missing a fire alert, and scenarios let you automate fire security to enhance home protection while you’re away. A complete set with stable wireless communication — essential reliability tested over the years by nearly two million users.
Informative notifications and detailed event log
The system instantly notifies about alarms with the critical alerts from the Ajax apps. Security companies and users know exactly which device triggered, when and where it happened. The system controls each device state and reports if there is a malfunction or it's time to replace the batteries. The event log records 500 recent events within the system. The data is explicit with the device, time, and description of the event. It helps find the causes to obtain comprehensive information for firefighters or an insurance company.
Monitoring with PRO Desktop
With PRO Desktop, building administration staff can observe not only security but Ajax fire detectors for instant reaction to alarms. Device statuses, event log, batteries data — the CMS operator has a complete picture in one intuitive interface, all informative and centralized. The installation engineer can remotely change the settings and provide services in time.
Advanced automation for greater safety
Ajax fire detectors are a part of the Ajax ecosystem and can interact with automation devices, cameras, and PhOD detectors of the MotionCam lineup through scenarios. In the case of a CO alarm, the WallSwitch relay turns on ventilation, and Relay unlocks emergency exits. At the same time, MotionCam (PhOD) and cameras send visual verification into Ajax apps to indicate people inside the premises who might be poisoned by carbon monoxide and need emergency assistance. The result is a reliable combination of security and automation that works as a Swiss watch.
To supply fresh air and reduce carbon monoxide concentration in the air.
CO detected
FireProtect 2
WallSwitch
Ventilation on
To speed up people’s evacuation and ease emergency and rescue services access to the building.
CO detected
FireProtect 2
Relay
Emergency exits unlocked
Jeweller
Unique wireless technologies
The Ajax system uses two-way secure radio communication based on the Jeweller proprietary protocol. It supports block cipher encryption and device authentication on every session with the hub to prevent sabotage, spoofing, or data theft.
Up to 5,500 ft (1,700 m) of radio communication with a hub
Encrypted two-way radio communication
Notifications about jamming and connection loss
Scaled and comprehensive
For complex radio signal conditions like large houses with thick walls or warehouses with several buildings, there is the ReX range extender. It boosts the range of all Ajax devices and manages their communication with the hub via Jeweller. And ReX 2 assures stable communication even through steel and concrete via Ethernet using the wire as the additional communication channel. Up to 5 range extenders can operate within one Ajax system to expand the network twice as big, covering underground parking, basements, and metal hangars.
Up to 5 range extenders within one system
Ethernet as an alternative communication channel
Effortless installation and maintenance
FireProtect 2 is ready to operate straight out of the box. There is no need to disassemble the detector during installation. With an improved SmartBracket panel, an installer can effortlessly fix the detector on ceilings and level it at 90° angles after mounting. The Ajax apps help quickly make the device a part of the system. And it can always be reconfigured remotely without site visits.
The detector is maintenance-free. A self-test system automatically diagnoses sensors and reports their state to the hub. Testing can also be run manually anytime in the app or by pressing the detectors' front panel with any suitable item, either a hand or a mop handle.
Pairing with the hub via QR code
SmartBracket panel with an adjustable rotation angle — no need to disassemble the enclosure
Configuring and testing in the mobile or desktop apps
A self-test system automatically diagnoses sensors' state
Only Hub 2 Plus Jeweller and Hub 2 (4G) Jeweller are certified by UL/ULC standards.
Technical information
FireProtect 2 RB (CO) UL Jeweller
Ajax product categories
In an Ajax system, you can combine devices of all product categories: Intrusion protection (both Superior and Baseline), Video surveillance, Fire and life safety, or Comfort and automation. Create the system to suit your needs and manage it in a single interface.
