United StatesTech specs
Type4 Fire ReX Jeweller
Wireless addressable radio signal range extender for Type4 Fire Hub Jeweller
Device compatibility
CheckConnection possibilities
Number of Type4 Fire ReX Jeweller devices connected to the fire alarm central unit
up to 5
Number of devices connected to Type4 Fire ReX Jeweller
up to 199
Wireless communication
Jeweller communication technology
Proprietary wireless communication technology to transmit commands, alarms, and events.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote control and configuration in Ajax apps.
Frequency band
868.0–868.6 MHz
Maximum effective radiated power (ERP)
up to 20 mW
Automatic power control to reduce power consumption and radio interference.
Radio signal modulation
GFSK
Radio communication range
up to 1,800 m
Between the fire alarm central unit and connected devices (in open space). Maximum range depends on the connected device.
Encrypted communication
All stored and transmitted data are protected by block encryption featuring a dynamic key.
Frequency hopping
To prevent radio interference and jamming.
Wings communication technology
Proprietary wireless communication technology to transmit photo verifications and update firmware.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Block encryption featuring a dynamic key.
- Data packet reload in case of transmission errors.
- Photo delivery check.
Frequency band
868.0–868.6 MHz
Radio communication range
up to 1,800 m
Between the fire alarm central unit and a radio signal range extender, or between a range extender and connected devices (in an open space). Maximum range depends on the connected device.
Encrypted communication
All stored and transmitted data is protected by block encryption featuring a dynamic key.
Frequency hopping
To prevent radio interference and jamming.
Communication channels
Ethernet
1 8P8C socket
Up to 100 Mbps.
Delivery time
Alarm delivery time to the fire alarm central unit
0.3 s
Photo delivery time to the fire alarm central unit
18 s
Via Type4 Fire ReX Jeweller using the Wings channel. Delivery time depends on the settings.
10 s
Via Type4 Fire ReX Jeweller using the Ethernet channel. Delivery time depends on the settings.
Additional features
LED indication
green
For power supply status.
yellow
For device faults.
Special tool (key)
The special tool is used to remove the front panel from the range extender.
Installation recommendations
The device is designed for indoor use only.
The device operating voltage is 110–240 V~.
Sabotage protection
Tamper buttons
2
Notifications about the fault on attempts to detach the device from the surface or remove the mounting panel.
Protection against spoofing
device authentication
Connection loss detection
after 36 s
Detection time depends on Jeweller settings.
Power supply
External
110–240 V, 50/60 Hz
Up to 0.48 A of mains power consumption.
Internal
7.4 V⎓, 5 Ah/10 Ah
On a rechargeable Li-ion battery (not included in the complete set): Type4 Internal Battery (24h) or Type4 Internal Battery (72h).
Quiescent device's current consumption at nominal voltage
80 mA
Maximum device's current consumption at nominal voltage
105 mA
Low battery voltage
6 V⎓
Low battery recovery voltage
6.2 V⎓
End-of-life battery voltage
6 V⎓
The device switches off.
Minimum energy level for a backup battery in the charged state
8 V⎓
Autonomous operation
On internal battery
up to 50 hours
When Ethernet is enabled. On Type4 Internal Battery (24h) (not included in the complete set).
up to 100 hours
When Ethernet is enabled. On Type4 Internal Battery (72h) (not included in the complete set).
Enclosure
Dimensions
210 × 210 × 51 mm
Weight
890 g
Operating temperature range
from –10 °C to +40 °C
Operating humidity
up to 75% non-condensing
Protection class
IP20
Flammability rating
UL 94 V-0
Color
Black
White
Complete set
Type4 Fire ReX Jeweller
SmartBracket mounting panel
Installation kit
Ethernet cable
Special tool (key)
Quick start guide
Revision
1