Superior StreetSiren DoubleDeck Jeweller

Superior Jeweller data transfer protocol

Proprietary wireless protocol for transmitting commands, alarms, and events. An upgraded version of the Jeweller radio protocol for Superior devices, ensuring compliance with Grade 3 (EN 50131).

Superior Jeweller data transfer protocol is supported when the siren with firmware version 10.66.4.1 or later is added to a hub supporting the Superior Jeweller protocol and running OS Malevich 2.30 or later.

All the other sirens work via the Jeweller communication protocol.

Key features:

• Two-way communication.
• Advanced anti-sabotage.
• Enhanced block encryption with a dynamic key.
• Instant notifications.
• Remote control and configuration in Ajax apps.

Frequency bands

868.0–868.6 MHz

Maximum effective radiated power (ERP)

up to 25 mW

Automatic power control to reduce power consumption and noise interference.

Radio signal modulation

GFSK

Radio signal range

up to 11,450 ft

Between the siren and a hub (or a range extender) in an open space. The maximum range depends on the hub model.

Encrypted communication

All stored and transmitted data are protected by block encryption featuring a dynamic key.

Frequency hopping

To prevent radio interference and jamming.

Wings communication technology

Proprietary wireless communication technology for uploading firmware updates.

Key features:

• Two-way communication.
• Advanced sabotage protection.
• Block encryption featuring a dynamic key.
• Data packet reload in case of transmission errors.
• Data packets delivery check.

Frequency bands

868.0–868.6 MHz

Radio communication range

up to 6,550 ft

Between the siren and a hub (or a range extender) in an open space. The maximum range depends on the hub model.

Encrypted communication

All stored and transmitted data is protected with advanced encryption, ensuring both confidentiality and integrity.

Frequency hopping

To prevent radio interference and jamming.

Tamper alarm

Notifications on attempts to detach the siren from the surface or remove it from the mounting panel.

Protection against spoofing

device authentication

Communication loss detection

after 36 s

Detection time depends on the Jeweller or Jeweller/Fibra settings.

Batteries

4 × CR123A 3 V⎓ Lithium battery

Pre-installed.

Type

Type C.

Calculated battery life

up to 5 years

Siren’s operating voltage range

3.65−6.2 V⎓

Siren’s nominal operating voltage

6 V⎓

Quiescent siren’s current consumption at nominal voltage

60 µA

Peak siren’s current consumption at nominal voltage

1.1 A

When the siren sounds at the Very Loud volume level.

Average siren’s current consumption at nominal voltage

454 mA

When the siren sounds at the default volume level. Regardless of the arming mode.

Full capacity

6,400 mAh

Low battery voltage

4.25 V⎓

End-of-life battery voltage

3.65 V⎓

Device is switched off.

End-of-life battery capacity

460 mAh

Manufacturer

Panasonic

Remote power supply’s operating voltage

6−20 V⎓

Remote power supply’s nominal voltage

12 V⎓

Quiescent siren’s current consumption at nominal voltage

0.016 A

Average siren’s current consumption at nominal voltage

0.29 A

When the siren sounds at the default volume level. Regardless of the arming mode.

Peak siren’s current consumption at nominal voltage

0.36 A

When the siren sounds at the Very Loud volume level.

Superior StreetSiren DoubleDeck Jeweller

SmartBracket mounting panel

Installation kit

Quick start guide