Type4 Hub (4G) Jeweller

Wireless Ajax devices

up to 100

Supports only Ajax devices from the Type4 product line in any combination, except for a single Type4 Fire ReX Jeweller range extender.

Users

up to 50

• Any number of admin users within the fire alarm central unit limit.
• PRO accounts for installers.
• PRO accounts for installation and monitoring companies.
• Access management for users.

Automation scenarios

up to 5

• By alarm.
• By schedule.
• By arming/disarming.

Security groups

up to 9

Rooms

up to 50

Jeweller communication technology

Proprietary wireless communication technology to transmit commands, alarms, and events.

Key features:

• Two-way communication.
• Advanced anti-sabotage.
• Block encryption featuring a dynamic key.
• Instant notifications.
• Remote configuration via the Ajax apps.

Radio frequency bands

868.0–868.6 MHz

Maximum effective radiated power (ERP)

up to 25 mW

Automatic power control to reduce power consumption and radio interference.

Radio signal modulation

GFSK

Radio communication range

up to 2,000 m

Between the fire alarm central unit and connected devices (in an open space).

Maximum range depends on the connected device.

Polling interval

from 12 to 300 s

Adjusted by PRO or user with admin rights in the Ajax apps.

Encrypted radio communication

All the data stored and transmitted is protected by block encryption featuring a dynamic key.

Frequency hopping

To prevent radio interference and jamming.

Supported protocols

• SIA (DC-09)
• SurGard (Contact ID)
• ​​ADEMCO 685
• Other proprietary protocols

Event types

• System alarms and events
• Panic button coordinates

Tamper button

Notifications about the fault on attempts to detach the device from the surface or remove the mounting panel.

Protection against spoofing

device authentication

Connection loss detection

after 36 s

Detection time depends on Jeweller settings.

Main

110–240 V~, 50/60 Hz

Up to 10 W of mains power consumption.

Backup

built-in backup rechargeable battery: Li-ion 3 А·h

Up to 15 hours of offline operation when the Ethernet is switched off.

Type4 Hub (4G) Jeweller has a 3-pin battery. To replace the battery, use the same one.

Alternative

6 V⎓ (when using 6V PSU (type A))

12–24 V⎓ (when using 12–24V PSU (type A))

Requires the appropriate alternative power supply unit (sold separately).

Type4 Hub (4G) Jeweller

SmartBracket mounting panel

Power supply cable

Ethernet cable

Installation kit

GSM start package (available not in all countries)

Quick start guide

1